Adhesive Lined Dual Wall Heatshrink Black 6mm x 50mm (HSAL.6)

ADHESIVE LINED DUAL WALL HEATSHRINK BLACK 6MM X 50MM.

Adhesive‑Lined Dual‑Wall Heat Shrink Tubing – Black, 6mm, 3:1 Shrink Ratio (50mm Pre‑Cut, Pack of 100)

This dual‑wall heat shrink tubing is made from flexible, flame‑retardant Polyolefin with an internal adhesive lining. When heated, the outer layer shrinks at a 3:1 ratio, while the inner adhesive melts and flows to form a secure, moisture‑resistant seal around the cable or component.

Each piece is supplied pre‑cut to 50mm, with an expanded internal diameter of 6.4mm and a recovered diameter of 2.0mm after shrinking. The recovered wall thickness is approximately 1.2mm, including an inner adhesive layer of around 0.65mm. This tubing is suitable for environmental sealing, strain relief, and protection of electrical joints, connectors, and splices, particularly in marine and automotive applications.

Pack of 100

Download Data Sheet