Adh.Lined H/Shrnk 4/14mm Blk (HSAL.4)

ADHESIVE LINED HEATSHRINK

Adhesive‑Lined Dual‑Wall Heat Shrink Tubing – Black, 4.0mm, 3:1 Shrink Ratio (14mm Pre‑Cut, Pack of 100)

This dual‑wall heat shrink tubing is made from flexible, flame‑retardant Polyolefin with an internal adhesive lining. When heated, the outer layer shrinks at a 3:1 ratio, while the inner adhesive melts and bonds to the cable or component, creating a sealed, moisture‑resistant finish.

Each piece is supplied pre‑cut to 14mm, with an expanded internal diameter of 4.8mm and a recovered diameter of 1.5mm after shrinking. The recovered wall thickness is approximately 1.1mm, including an inner adhesive layer of around 0.6mm. This tubing is suitable for environmental sealing, strain relief, and protection of electrical joints, connectors, and splices.

Pack contains approximately 100 pieces.

Download Data Sheet