Adhesive Lined Dual Wall Heatshrink Black 9mm (HSAL.9)

ADHESIVE LINED DUAL WALL  HEATSHRINK BLACK 9MM WIDTH X 50MM LENGTH 

Adhesive‑Lined Dual‑Wall Heat Shrink Tubing – Black, 9mm, 3:1 Shrink Ratio (50mm Pre‑Cut, Pack of 100)

This dual‑wall heat shrink tubing is made from flexible, flame‑retardant Polyolefin with an internal adhesive lining. When heated, the outer layer shrinks at a 3:1 ratio, while the inner adhesive melts and flows to create a secure, weather‑tight seal around the cable or component.

Each piece is supplied pre‑cut to 50mm, with an expanded internal diameter of 9.5mm and a recovered diameter of 3.0mm after shrinking. The recovered wall thickness is approximately 1.3mm, including an inner adhesive layer of around 0.65mm. This tubing is suitable for environmental sealing, strain relief, and protection of electrical joints, connectors, and splices, particularly in marine and automotive applications.

Pack contains approximately 100 pieces.

Download Data Sheet